Electronics

CANchecked MCE18 CAN input module

TCU TurboLamik Controller
- PCB
- UNIVERSAL WIRING HARNESS:CAN Program Switch
- LCD DISPLAY
- Epoxy Potting Compound

This safety deposit is fully refunded once we have received the tool.

We ONLY accept PayPal Friends and Family or Interac in Canada at support@perfecttuning.net.

REGULAR PAYMENT FEES ARE NOT REFUNDED TO US AND WILL BE DEDUCTED FROM THE SAFETY DEPOSIT.

Shipping return address is:
​ ​Perfect Tuning
​ 528 Ch. Du 4e Rang, Sherbrooke
Qc, Canada, J1C 0A1

If this tool is crossing the border, DO NOT insure or declare higher than $10 USD. If not, broker fees will be deducted from your safety deposit.

This 5 buttons CAN Keypad is perfect for a 8HP transmission swap!

It feels extremely tactile and can light up a variety of colors.

Can be mounted horizontally or vertically, buttons are removable and are interchangeable and can be rotated 90°

Includes button inserts as shown (others available)

5 Button:
PRND and a customizable button that can be used for LC or mode change.

4 wire Deutsch connector:
12V+
Ground
CAN H
CAN L

https://media.blinkmarine.com/pkp-1500-li-canopen-um

CAN based keypads from Blink Marine in Italy using the J1939 CAN protocol.

Full support in all MaxxECU units.



No icon packs are included, must be bought separately Pre programmed with J1939 CAN standard which MaxxECU uses.

CAN based keypads from Blink Marine in Italy using the J1939 CAN protocol.

Full support in all MaxxECU units.



No icon packs are included, must be bought separately Pre programmed with J1939 CAN standard which MaxxECU uses.

CAN based keypads from Blink Marine in Italy using the J1939 CAN protocol.
Full support in all MaxxECU units.

No icon packs are included, must be bought separately Pre programmed with J1939 CAN standard which MaxxECU uses.

Made to fit the Dodge 8HP shifter, if using another CAN shifter, the connector needs to be cut and changed.
The OBD connector is there for future flash/tuning purposes.
1800mm between the shifter and the GT150 connector.
2100mm between the 8HP connector and the GT150 connector.

CAN based keypads from Blink Marine in Italy using the J1939 CAN protocol.

Full support in all MaxxECU units.



No icon packs are included, must be bought separately Pre programmed with J1939 CAN standard which MaxxECU uses.

CAN based keypads from Blink Marine in Italy using the J1939 CAN protocol.

Full support in all MaxxECU units.



No icon packs are included, must be bought separately Pre programmed with J1939 CAN standard which MaxxECU uses.