Se rendre au contenu

MaxxECU / 8HPTheWorld

A MaxxECU setup that fits your 8HP swap.

Our MINI kit pairs a standalone 8HP controller with our Perfect Tuning harness. TRACK and RACE GEN2 offer complete engine and supported GEN1 transmission control. Compare all three setups below.

Compare MINI, TRACK & RACE Shop MaxxECU

Powered by Perfect Tuning in Quebec, Canada. Support in English and French.

MINI, TRACK or RACE?

MaxxECU MINI kit and our 8HP harnessOur MINI 8HP kit + harnessKeep your current engine ECU. MaxxECU GEN2 TRACK kitMaxxECU GEN2 TRACKEngine + supported GEN1 8HP control. MaxxECU GEN2 RACE kitMaxxECU GEN2 RACEMore inputs and outputs for complex builds.

Built around your 8HP project

Start with the exact donor and the parts you already own.

Wiring and integration support

Engine harnesses, transmission wiring and shifter planning.

A team behind the parts

Project guidance from Perfect Tuning in Quebec.

Transmission-only or engine + transmission control

Choose your MaxxECU setup

Keep your current engine ECU with our MINI 8HP kit and harness, or choose TRACK or RACE GEN2 for complete engine and supported GEN1 transmission control.

GEN2 ECU does not mean GEN2 transmission. TRACK GEN2 and RACE GEN2 can control a supported GEN1 8HP45/70/90. GEN2 8HP50/75 and GEN3 8HP51/76 require a separate transmission-control plan.
Our MaxxECU MINI 8HP kit with Perfect Tuning transmission harness

Our standalone controller + harness package

MaxxECU MINI 8HP kit

Keep your current engine ECU and control a supported GEN1 8HP with our MINI and harness package.

  • Supported GEN1 8HP45/70/90 applications
  • Perfect Tuning 6 ft transmission harness
  • Basic startup tune included
  • Custom harness lengths available on request

Included: MaxxECU MINI, our 8HP harness and a basic startup tune. BMW/Dodge shifter harnesses are separate when required.

View MINI 8HP kit

Confirm TCU flashing, engine signals and torque-reduction integration. The startup tune is not a complete vehicle calibration.

MaxxECU GEN2 TRACK ECU

A starting point for many 4, 6 and 8-cylinder builds

MaxxECU GEN2 TRACK

Plan complete engine and supported GEN1 transmission control with room for wideband feedback, knock monitoring and CAN integration.

  • Up to 8 cylinders fully sequentially
  • 8 injector and 8 ignition outputs
  • 16 analog inputs and dual CAN
  • Dual wideband and dual knock inputs; 8 GB logging

Featured install kit: ECU, flying-lead wiring and one LSU 5.2 wideband sensor.

View TRACK install kit Prefer two sensors? View the dual-LSU kit
MaxxECU GEN2 RACE ECU

More I/O for complex installations

MaxxECU GEN2 RACE

Choose RACE when the build needs more cylinders, staged injection, additional sensors or greater output capacity.

  • Up to 12 cylinders fully sequentially
  • 16 injector and 12 ignition outputs
  • 24 analog inputs, 8 Type-K EGT inputs and dual CAN
  • Dual wideband and dual knock inputs; 16 GB logging

Featured install kit: ECU, wiring harness and one LSU 5.2 wideband sensor.

View RACE install kit Prefer two sensors? View the dual-LSU kit

All three setups require an application-specific integration and calibration plan. Confirm donor compatibility and TCU firmware before ordering. MINI includes our transmission harness; TRACK/RACE install kits include engine-side flying-lead wiring. Any additional shifter or transmission wiring must be matched to the selected package.

Not sure which setup fits? Send us your engine, transmission and current ECU for a recommendation.

02 / Complete the installation

The ECU is one part of the setup.

A workable plan connects the engine, transmission, shifter and wiring.

Tell us what is already in the car. We can review the missing pieces and help you choose the next step.

Get my setup reviewed

Engine wiring

Match sensors, ignition, injectors and accessories to the chosen ECU. Custom harnesses are quoted for your application.

Explore custom MaxxECU engine harnesses

Transmission wiring and TCU preparation

Confirm the donor, compatible TCU firmware, power supply and transmission harness before installation.

See the 8HP control requirements

Shifter, signals and calibration

BMW, Dodge, paddles and CAN controls have different wiring requirements. Review the full control strategy with the engine ECU you will use.

Ask about your existing parts

03 / Make an informed choice

Useful guides before you buy

Before you order

Does MaxxECU control every 8HP?

No. Direct 8HP control is for supported GEN1 8HP45/70/90 transmissions. The donor, TCU preparation and wiring still need checking. Use our controller guide for other transmission generations.

Can I keep my engine ECU?

Our MINI 8HP kit includes a MaxxECU MINI, Perfect Tuning 6 ft transmission harness and basic startup tune for a compatible GEN1 application. Required engine signals and torque-reduction integration must still be planned for the engine ECU in your car.

What should I send for a recommendation?

Your vehicle and engine, current ECU, transmission model and donor, shifter, power goal, and a list of the parts you already own. Transmission photos and identification markings help.

Can I order an ECU from outside Canada or the USA?

MaxxECU ECU orders delivered outside Canada and the United States require review. Contact us before ordering so we can discuss the appropriate supply arrangement for your location.

Put the complete setup on one parts list.

Send your build details and the parts you already own. We will help you plan the ECU, wiring and transmission control together.

Get my setup reviewed