Aristo GS300 GS400

Toyota 200mm and 220mm differential 3 bolts differential flange adapter to standard 1350 joint (for aftermarket driveshafts).
Comes with bolts.
Compatible with Toyota Supra MKIV differentials, Soarer, SC300, SC400, Aristo, GS300, GS400, GS430.

Banjo Hose End Fitting Assembly, Hose Size: -8 AN;

The banjo fittings are the perfect solution to installing a transmission cooler in your swapped car.

PRICE FOR ONE (1), 2 required on Dodge 8HP Transmissions.

If you're planning on controlling your transmission with a Maxxecu, you will have noticed you need to flash its valve body. This tool allows you to do just that!

How it works:
- Rental is $100USD
- Shipping is at buyer's expense both ways
- We expect the tool to be shipped back within 7 workings days following your reception

***A $600USD safety deposit is required to rent the tool, which will be fully refunded once the tool is back in our possession***

Important notice:
Maxxecu is actively developing this software, implying they will most likely release new features and options in the future, requiring a new reflash. In this case, we offer a 50% discount on the tool rental.

2JZ to Dodge 8HP Adapter Kit

Upgrade your JZ-powered build with a modern Dodge 8HP transmission. This kit is designed to adapt nearly all 2015+ Dodge passenger-car 8HP transmissions to 1JZ and 2JZ engines.

Included:
- Adapter plate
- Torque adapter with centering hub adapter
- All required adapter hardware
- QR-code installation instructions

Required but not included:
- OEM automatic JZ flexplate
- New OEM or ARP flexplate bolts (strongly recommended)
- Transmission, controller/wiring, transmission mount and driveshaft

Please contact us with your engine, transmission and vehicle details if you would like us to confirm compatibility before ordering.

8HP Vent/Breather with filter

8HP Firmware Flash Service done by us at Perfect tuning instead of renting the flash tool

This is an heavy duty aluminium driveshaft compatible with the Dodge 8HP70 or 8HP45 swap kit we offer for the Lexus GS300. It uses the Dodge 6 bolts flange, 3.5" aluminium with massive 1350 joints.

This driveshaft must be used with Toyota 3 bolt 1350 differential adapter we offer.

Compatible with the Dodge 6 bolts transmission flange (Charger, Challenger, 300c RWD only).

Contact us if you have a different model.

PHR 304 stainless-steel heater return pipe for 2JZ-GTE single-turbo applications. Re-routes the heater return line for improved turbo manifold and downpipe clearance. Requires removal of the factory twin turbos and OEM oil cooler, plus capping/plugging the unused coolant ports. Confirm the required heater hose kit for the chassis.

Which transmission are you using?
- 8HP70: Includes the 8HP70 transmission mount and a pre-drilled 2JZ adapter.
- 8HP45: Includes the 8HP45 transmission mount and an undrilled 2JZ adapter. The customer or installer must drill and fit the adapter.
Please verify the transmission model before ordering.

This base kit includes the required core parts to install a Dodge 8HP70 transmission in a Lexus GS300 / Toyota Aristo with a 2JZ engine.

The base kit includes:
- 2JZ to Dodge 8HP Adapter kit
- Lexus GS300 / Aristo engine brackets
- Dodge 8HP70 to Lexus GS300 / Aristo Driveshaft with 1350 joints
- Dodge 8HP70 Driveshaft Bolt kit
- Toyota 3 bolt differential adapter for 1350 driveshaft
- 8HP Transmission Mount Kit with crossmember for Lexus GS300 / Aristo
- 2x Dodge 8HP Banjo Fittings

- 8HP Aluminum Oil Pan

Transmission fluid is not included; Motul ATF VI (12 pack) is available separately.

Custom made wiring harness for Lexus GS300

GS300 Electronic Throttle Pedal with bracket and hardware

Undrilled 2JZ to Dodge 8HP adapter plate for 8HP45 applications. The installer must drill and fit the plate to the transmission.

Lexus GS300 / Toyota Aristo BMW 8HP base swap kit.

Select exact transmission configuration.

Required for the bolt-on driveshaft solution: Use the automatic driveshaft from a GS430 with this kit for a bolt on solution.

Optional custom one-piece 1350 U-joint driveshaft quoted separately (might required a confirmed measurement after installation before the driveshaft can be ordered).

Optional custom one-piece driveshaft with 1350-series U-joints for Lexus GS300 / Toyota Aristo BMW 8HP swap. Confirm exact transmission/output flange, differential flange and flange-to-flange measurement before manufacture or quote. Not included in the base swap kit.