SC300 SC400 Soarer JZZ30

Lexus SC300 / Soarer Dodge 8HP Base Swap Kit
Which transmission are you using?
- 8HP70: Includes the 8HP70 transmission mount and a pre-drilled 2JZ adapter.
- 8HP45: Includes the 8HP45 transmission mount and an undrilled 2JZ adapter. The customer or installer must drill and fit the adapter.
Please verify the transmission model before ordering.

The base kit includes:
- 2JZ to Dodge 8HP Adapter kit
- Dodge 8HP70 to Lexus SC300 / Soarer Driveshaft with 1350 joint
- Dodge 8HP70 Driveshaft Bolt kit
- Toyota 3 bolt differential adapter for 1350 driveshaft
- 8HP70 Transmission Mount Kit with crossmember for SC300/Soarer
- 2x Dodge 8HP Banjo Fittings
- 8HP Aluminum Oil Pan

Transmission fluid is not included; Motul ATF VI (12 pack) is available separately.

Toyota/Lexus block off plate for Perfect Tuning Sequential shifter
Compatible with manuel Toyota Supra MKIV, Manual Lexus IS300 and Manual Toyota Soarer or SC300.

Perfect Tuning Sequential Shifter with amazing shift feeling and quality! It's a real good alternative to DCT shifter that is twice the price!

Toyota 200mm and 220mm differential 3 bolts differential flange adapter to standard 1350 joint (for aftermarket driveshafts).
Comes with bolts.
Compatible with Toyota Supra MKIV differentials, Soarer, SC300, SC400, Aristo, GS300, GS400, GS430.

This is an heavy duty aluminium driveshaft compatible with the Dodge 8HP70 swap kit we offer for the Lexus SC300 and SC400. It uses the Dodge 6 bolts flange, 3.5" aluminium with massive 1350 joints.

This driveshaft must be used with Toyota MKIV 1350 differential adapter plate we offer.

Banjo Hose End Fitting Assembly, Hose Size: -8 AN;

The banjo fittings are the perfect solution to installing a transmission cooler in your swapped car.

PRICE FOR ONE (1), 2 required on Dodge 8HP Transmissions.

8HP70 Transmission Mount Kit (JZA80 Supra, SC3/400, Soarer)

What's included:
- Crossmember and spacers
- Transmission side bracket
- Polyeurethane Bushing
- All the necessary hardware

If you're planning on controlling your transmission with a Maxxecu, you will have noticed you need to flash its valve body. This tool allows you to do just that!

How it works:
- Rental is $100USD
- Shipping is at buyer's expense both ways
- We expect the tool to be shipped back within 7 workings days following your reception

***A $600USD safety deposit is required to rent the tool, which will be fully refunded once the tool is back in our possession***

Important notice:
Maxxecu is actively developing this software, implying they will most likely release new features and options in the future, requiring a new reflash. In this case, we offer a 50% discount on the tool rental.

2JZ to Dodge 8HP Adapter Kit

Upgrade your JZ-powered build with a modern Dodge 8HP transmission. This kit is designed to adapt nearly all 2015+ Dodge passenger-car 8HP transmissions to 1JZ and 2JZ engines.

Included:
- Adapter plate
- Torque adapter with centering hub adapter
- All required adapter hardware
- QR-code installation instructions

Required but not included:
- OEM automatic JZ flexplate
- New OEM or ARP flexplate bolts (strongly recommended)
- Transmission, controller/wiring, transmission mount and driveshaft

Please contact us with your engine, transmission and vehicle details if you would like us to confirm compatibility before ordering.

8HP Vent/Breather with filter

Lexus SC300 Clutch Simulator Kit
Include clutch position sensor with bracket and connector and clutch simulator with clutch master delete plate.

We are proud to release a complete bolt-on transmission mount kit with crossmember for the JZA80 Supra, SC3/400, and Soarer.

***THIS KIT WORKS EXCLUSIVELY WITH THE DODGE CHARGER/CHALLENGER 8HP45***

What's included:
- Crossmember and spacers
- Transmission side bracket
- Polyeurethane Bushing
- All the necessary hardware

8HP Firmware Flash Service done by us at Perfect tuning instead of renting the flash tool

Custom made wiring harness for Lexus SC300 compatible with MaxxECU Race or Sport.
- OEM ECU can be removed.
- MaxxECU is located at the OEM ECU location on the passenger feets
- Specify injectors and ignition type
- Support OEM Drive by wire or aftermarket.
- Specify intake and throttle type. We do offer custom DBW Pedal kit for complete throttle cable removal.
- Cruise control working
- Boost control valve (valve not included)
- Wiring for Water Meth control
- OEM Fan Control
- A/C Control

Extra harness included:
- 8HP Transmission harness with wiring for sequential shifter

*** MADE TO ORDER *** 3-4 weeks production delay.
Core harness might be required depending on the setup.

This adapter offers an easy-to-install solution if you're looking to install the BMW shifter or A90 Supra shifter in your older Toyota.

This works with the OEM plastic shifter assembly (which is bolted underneath the automatic gear selector).

Made from ASA-CF to be extremely durable and heat-resistant.

Undrilled 2JZ to Dodge 8HP adapter plate for 8HP45 applications. The installer must drill and fit the plate to the transmission.