Shop by Transmission

Lexus SC300 / Soarer Dodge 8HP Base Swap Kit
Which transmission are you using?
- 8HP70: Includes the 8HP70 transmission mount and a pre-drilled 2JZ adapter.
- 8HP45: Includes the 8HP45 transmission mount and an undrilled 2JZ adapter. The customer or installer must drill and fit the adapter.
Please verify the transmission model before ordering.

The base kit includes:
- 2JZ to Dodge 8HP Adapter kit
- Dodge 8HP70 to Lexus SC300 / Soarer Driveshaft with 1350 joint
- Dodge 8HP70 Driveshaft Bolt kit
- Toyota 3 bolt differential adapter for 1350 driveshaft
- 8HP70 Transmission Mount Kit with crossmember for SC300/Soarer
- 2x Dodge 8HP Banjo Fittings
- 8HP Aluminum Oil Pan

Transmission fluid is not included; Motul ATF VI (12 pack) is available separately.

Which transmission are you using?
- 8HP70: Includes the 8HP70 transmission mount and a pre-drilled 2JZ adapter.
- 8HP45: Includes the 8HP45 transmission mount and an undrilled 2JZ adapter. The customer or installer must drill and fit the adapter.
Please verify the transmission model before ordering.

Lexus IS300 Dodge 8HP Base Swap Kit
The base kit includes:
- 2JZ to Dodge 8HP Adapter kit
- Lexus IS300 Engine brackets
- Dodge 8HP70 to Lexus IS300 Driveshaft with 1310 joints
- Dodge 8HP70 Driveshaft Bolt kit
- 8HP Transmission Mount Kit with crossmember for Lexus IS300
- Dodge 8HP Banjo Fittings

- 8HP Aluminum Oil Pan

Transmission fluid is not included; Motul ATF VI (12 pack) is available separately.

Turbolamik PCB for 8HP valvebody modification.

This clutch position sensor allows the Turbolamik to read your clutch input.

Our clutch simulator kit is designed around the use of this sensor.

8HP HD Aluminium oil pan with replacable filter
This is what we use on our Dodge 8HP70 and 8HP45 tranmission and it fits and work perfectly.

This is for a custom 8HP driveshaft for you swap.
Contact us for a price at [email protected]
3.5" Aluminium, 1350 or 1310 u-joints
Please specify:
1- the differential flange required.
2- transmission flange (transmission version)
3- Provide the measurement between transmission flange and differential flange.

This is an heavy duty aluminium driveshaft compatible with the Dodge 8HP70 or 8HP45 swap kit we offer for the Toyota Supra MKIV. It uses the Dodge 6 bolts flange, 3.5" aluminium with massive 1350 joints.
Driveshaft
This driveshaft must be used with Toyota MKIV 1350 differential adapter plate we offer.

Compatible with the Dodge 6 bolts transmission flange (Charger, Challenger, 300c RWD only).

Contact us if you have a different model.

This is an heavy duty aluminium driveshaft compatible with the Dodge 8HP70 swap kit we offer for the Lexus SC300 and SC400. It uses the Dodge 6 bolts flange, 3.5" aluminium with massive 1350 joints.

This driveshaft must be used with Toyota MKIV 1350 differential adapter plate we offer.

Banjo Hose End Fitting Assembly, Hose Size: -8 AN;

The banjo fittings are the perfect solution to installing a transmission cooler in your swapped car.

PRICE FOR ONE (1), 2 required on Dodge 8HP Transmissions.

TCU TurboLamik Controller
- PCB
- UNIVERSAL WIRING HARNESS:CAN Program Switch
- LCD DISPLAY
- Epoxy Potting Compound

8HP70 Transmission Mount Kit (JZA80 Supra, SC3/400, Soarer)

What's included:
- Crossmember and spacers
- Transmission side bracket
- Polyeurethane Bushing
- All the necessary hardware

MaxxECU 8HP (GEN1) cable harness (BMW 8HP shifter)

8HP transmission connector kit with pin and seals (16)
Works will all variation of 8HP transmsisions.

Dodge 8HP70 Transmission Mount
Compatible with Dodge 8HP70 from Charger, Challenger, 300c
Includes:
- Transmission plate
- Energy Polyurethane Bushing
- Necessary hardware

This option does not include ANY crossmember.

If you're planning on controlling your transmission with a Maxxecu, you will have noticed you need to flash its valve body. This tool allows you to do just that!

How it works:
- Rental is $100USD
- Shipping is at buyer's expense both ways
- We expect the tool to be shipped back within 7 workings days following your reception

***A $600USD safety deposit is required to rent the tool, which will be fully refunded once the tool is back in our possession***

Important notice:
Maxxecu is actively developing this software, implying they will most likely release new features and options in the future, requiring a new reflash. In this case, we offer a 50% discount on the tool rental.

2JZ to Dodge 8HP Adapter Kit

Upgrade your JZ-powered build with a modern Dodge 8HP transmission. This kit is designed to adapt nearly all 2015+ Dodge passenger-car 8HP transmissions to 1JZ and 2JZ engines.

Included:
- Adapter plate
- Torque adapter with centering hub adapter
- All required adapter hardware
- QR-code installation instructions

Required but not included:
- OEM automatic JZ flexplate
- New OEM or ARP flexplate bolts (strongly recommended)
- Transmission, controller/wiring, transmission mount and driveshaft

Please contact us with your engine, transmission and vehicle details if you would like us to confirm compatibility before ordering.

12 pack of Motul 1L Transmision Fluid ATF VI 100% Synthetic
Used for 8HP transmissions.
Around 9 liters are required to fill 8HP tranmission so you have few extra if you spill it or want to flush it after few miles to inspect the oil.

This service covers professional installation only – parts are not included. For the PCB and epoxy potting compound, please refer to our other listings.

Our experts handle the precise installation of the PCB board into your 8HP Mechatronik. We take care of soldering and testing to ensure optimal performance. Simply send us your Mechatronik, and we'll do the rest!

8HP Epoxy Potting Compound for Turbolamik PCB Installation.

MaxxECU 8HP cable harness for Dodge Shifter