Temperature sensor 1/8 NPT CLT (water / oil) (Closed element).
DTM 2 pins Connector not included.
Calibration:
-20deg C = 15.462ohm
130deg C = 89ohm

Lexus SC300 Clutch Simulator Kit
Include clutch position sensor with bracket and connector and clutch simulator with clutch master delete plate.

We are proud to release a complete bolt-on transmission mount kit with crossmember for the JZA80 Supra, SC3/400, and Soarer.

***THIS KIT WORKS EXCLUSIVELY WITH THE DODGE CHARGER/CHALLENGER 8HP45***

What's included:
- Crossmember and spacers
- Transmission side bracket
- Polyeurethane Bushing
- All the necessary hardware

8HP All variant Oil Pan Gasket

This is the Perfect Tuning CANBus Shifter module recommended to use with the Perfect Tuning Sequential shifter.

This module replace the need of a gear selector when using a a sequential shifter or shift paddles with a MaxxECU controlling a 8HP transmission.

Compatible with Dodge 8HP45 RWD from Charger, Challenger, 300c.

Includes:
- Transmission plate
- Energy Polyurethane Bushing
- Necessary hardware

This option does not include ANY crossmember.

8HP Firmware Flash Service done by us at Perfect tuning instead of renting the flash tool

Build your very own 8HP swap kit!

You can pick and choose any of our products available for your car. Contact us if you have any questions or comments.

You can view our swap guide here:
https://www.8hptheworld.com/a80-supra-guide

This is an heavy duty aluminium driveshaft compatible with the Dodge 8HP70 or 8HP45 swap kit we offer for the Lexus GS300. It uses the Dodge 6 bolts flange, 3.5" aluminium with massive 1350 joints.

This driveshaft must be used with Toyota 3 bolt 1350 differential adapter we offer.

Compatible with the Dodge 6 bolts transmission flange (Charger, Challenger, 300c RWD only).

Contact us if you have a different model.

Including MaxxECU Race and 4.2 Wideband

GEN III: 5.7L LS1/LS6
GEN IV: 6.0L LS2 6.2/7.0 LS3/LS4/LS7/LSX/LS9

For E-Throttle and Hella E-pedal
Prepared for turboapplication with an boost solenoid connector
Bosch JPT injector connectors
Uses stock coils
To be used with GEN IV knocksensors
MAP sensor hose inside harness
8 pcs EGT connectors in harness
Including trigger/cam adapters for GEN III and GEN IV sensors
Including BOSCH and Mitsubishi alternator adaptors
Easy to rewire to be used without E-Throttle if needed

Custom made wiring harness for Lexus IS300 compatible with MaxxECU Race.

- OEM ECU can be removed.
- MaxxECU Relocated under driver seat for a clean and simple installation.
- Specify injectors and ignition type
- Support OEM Drive by wire or aftermarket.
- Specify intake and throttle type. We do offer custom DBW Pedal kit for complete throttle cable removal.
- Cruise control working
- Boost control valve (valve not included)
- Wiring for Water Meth control
- OEM Fan Control
- A/C Control

CAN to MPX Module Not Included. We're working on a solution but it's not available yet!

Extra harness included:
- 8HP Transmission harness with wiring for sequential shifter

*** MADE TO ORDER *** 3-4 weeks production delay.
Core harness might be required depending on the setup.