All products

Custom made wiring harness for Lexus IS300 compatible with MaxxECU.

- OEM ECU can be removed.
- MaxxECU Relocated under driver seat for a clean and simple installation.
- Specify injectors and ignition type
- Support OEM Drive by wire or aftermarket.
- Specify intake and throttle type. We do offer custom DBW Pedal kit for complete throttle cable removal.
- Cruise control working
- Boost control valve (valve not included)
- Wiring for Water Meth control
- OEM Fan Control
- A/C Control (but no with the AC Button yet).

CAN to MPX Module Not Included. We're working on a solution but it's not available yet!

Extra harness included:
- 8HP Transmission harness with wiring for sequential shifter

*** MADE TO ORDER *** 3-4 weeks production delay.
Core harness might be required depending on the setup.

Custom made wiring harness for Lexus SC300 compatible with MaxxECU Race or Sport.
- OEM ECU can be removed.
- MaxxECU is located at the OEM ECU location on the passenger feets
- Specify injectors and ignition type
- Support OEM Drive by wire or aftermarket.
- Specify intake and throttle type. We do offer custom DBW Pedal kit for complete throttle cable removal.
- Cruise control working
- Boost control valve (valve not included)
- Wiring for Water Meth control
- OEM Fan Control
- A/C Control

Extra harness included:
- 8HP Transmission harness with wiring for sequential shifter

*** MADE TO ORDER *** 3-4 weeks production delay.
Core harness might be required depending on the setup.

Custom made wiring harness for Toyota Supra compatible with MaxxECU Race or Sport.
- OEM ECU can be removed.
- MaxxECU is located at the OEM ECU location on the passenger feets
- Specify injectors and ignition type
- Support OEM Drive by wire or aftermarket.
- Specify intake and throttle type. We do offer custom DBW Pedal kit for complete throttle cable removal.
- Cruise control working
- Boost control valve (valve not included)
- Wiring for Water Meth control
- OEM Fan Control
- A/C Control

Extra harness included:
- 8HP Transmission harness with wiring for sequential shifter

*** MADE TO ORDER *** 3-4 weeks production delay.
Core harness might be required depending on the setup.

Custom made wiring harness for Toyota Supra MK3 with 1jz or 2jz swap compatible with MaxxECU Race or Sport.
- OEM ECU can be removed.
- MaxxECU is located at the OEM ECU location on the passenger feets
- Specify injectors and ignition type
- Support OEM Drive by wire or aftermarket.
- Specify intake and throttle type. We do offer custom DBW Pedal kit for complete throttle cable removal.
- Cruise control working
- Boost control valve (valve not included)
- Wiring for Water Meth control
- OEM Fan Control
- A/C Control

Extra harness included:
- 8HP Transmission harness with wiring for sequential shifter

*** MADE TO ORDER *** 3-4 weeks production delay.
Core harness might be required depending on the setup.

Custom made wiring harness for Honda S2000 compatible with MaxxECU Race or Sport.
- OEM ECU can be removed.

- Specify injectors and ignition type
- Support OEM Drive by wire or aftermarket.
- Specify intake and throttle type. We do offer custom DBW Pedal kit for complete throttle cable removal.
- Cruise control working
- Boost control valve (valve not included)
- Wiring for Water Meth control
- OEM Fan Control
- A/C Control

Extra harness included:
- 8HP Transmission harness with wiring for sequential shifter

*** MADE TO ORDER *** 3-4 weeks production delay.
Core harness might be required depending on the setup.

Custom made wiring harness for any application. Contact us for a quote!

*** MADE TO ORDER *** 3-4 weeks production delay.
Core harness might be required depending on the setup.

Dodge 8HP70/45 to JZX90 Driveshaft aluminum with 1310 joints. Direct bolt on to factory differential.
No diff adapter required

Dodge 8HP70 to Toyota Chaser JZX90 Driveshaft aluminium with 1350 joints. Toyota 4 bolts Differential adapter is required

Ford Coyote to Dodge 8HP70/75/90/95 Adapter Kit

MaxxECU Mini 8HP45/70/90 Controller.

Please ensure that your transmission variant is compatible for flashing with the list available on maxxecu.com.

What's included:
- MaxxECU mini
- Perfect Tuning 8HP 6ft Harness
- If you need a specific length, please contact us when ordering.
- A basic tune to get your car up and running (minimal functions)

********* If a BMW or Dodge Shifter harness is required please add it to your cart if not, only a DTM-6 Connector is included and you need to make your own connections to your shifter *************

Advanced remote tuning available here:
https://perfecttuning.net/appointment/1?

Complete made-to-order engine wiring harness for MaxxECU GEN2 TRACK or GEN2 RACE. Intended for engine swaps, race cars and custom builds where the original engine wiring is replaced. This is not a Plug-in adapter for the original ECU connector. Built to your engine, injectors, ignition, throttle, sensors and vehicle integration requirements. A donor/core harness may be required. Typical production time: 3–4 weeks after specifications and required core parts are received.

Pulley kit aluminium machined billet black anodize
Compatible with 1JZ 2JZ
– Alternator pulley
– USDM Water pump pulley
– Power steering pulley

This adapter offers an easy-to-install solution if you're looking to install the BMW shifter or A90 Supra shifter in your older Toyota.

This works with the OEM plastic shifter assembly (which is bolted underneath the automatic gear selector).

Made from ASA-CF to be extremely durable and heat-resistant.

Lexus IS300 Electronic Throttle Pedal with bracket and hardware

PHR 304 stainless-steel heater return pipe for 2JZ-GTE single-turbo applications. Re-routes the heater return line for improved turbo manifold and downpipe clearance. Requires removal of the factory twin turbos and OEM oil cooler, plus capping/plugging the unused coolant ports. Confirm the required heater hose kit for the chassis.

Which transmission are you using?
- 8HP70: Includes the 8HP70 transmission mount and a pre-drilled 2JZ adapter.
- 8HP45: Includes the 8HP45 transmission mount and an undrilled 2JZ adapter. The customer or installer must drill and fit the adapter.
Please verify the transmission model before ordering.

This base kit includes the required core parts to install a Dodge 8HP70 transmission in a Lexus GS300 / Toyota Aristo with a 2JZ engine.

The base kit includes:
- 2JZ to Dodge 8HP Adapter kit
- Lexus GS300 / Aristo engine brackets
- Dodge 8HP70 to Lexus GS300 / Aristo Driveshaft with 1350 joints
- Dodge 8HP70 Driveshaft Bolt kit
- Toyota 3 bolt differential adapter for 1350 driveshaft
- 8HP Transmission Mount Kit with crossmember for Lexus GS300 / Aristo
- 2x Dodge 8HP Banjo Fittings

- 8HP Aluminum Oil Pan

Transmission fluid is not included; Motul ATF VI (12 pack) is available separately.

Due to popular demand, we now offer a complete and comprehensive engine/transmission/chassis harness combo!

What's included:
1. 1/2JZ engine harness (any flavor)
2. A full body plug integration (unlike most other harnesses)
3. 8HP transmission control with the shifter of your choosing (ours, Dodge, BMW, etc.)

All made with DTM/DTP connectors, TEFZEL wiring, heat shrink labelling, and nylon braided split loom.

***LEAD TIME: 3-4 WEEKS***