MaxxECU

MaxxECU Plugin ECU solution for Mitsubishi EVO VI - VIII

The EGR valve is not controlled.
Stock EVAP can be removed and freeing up GPO 7 for extra in/out on MaxxECU. For using the car's standard ODB-2 port an external wiring to ODB-2 port is needed.

Temperature sensor 1/8 NPT CLT (water / oil) (Closed element).
DTM 2 pins Connector not included.
Calibration:
-20deg C = 15.462ohm
130deg C = 89ohm

MaxxECU Race with Plug and play harness for Toyota Supra 89+ with 7m-GTE.
Compatible with automatic transmission.

Including MaxxECU Race and 4.2 Wideband

GEN III: 5.7L LS1/LS6
GEN IV: 6.0L LS2 6.2/7.0 LS3/LS4/LS7/LSX/LS9

For E-Throttle and Hella E-pedal
Prepared for turboapplication with an boost solenoid connector
Bosch JPT injector connectors
Uses stock coils
To be used with GEN IV knocksensors
MAP sensor hose inside harness
8 pcs EGT connectors in harness
Including trigger/cam adapters for GEN III and GEN IV sensors
Including BOSCH and Mitsubishi alternator adaptors
Easy to rewire to be used without E-Throttle if needed

Custom made wiring harness for Lexus IS300 compatible with MaxxECU.

- OEM ECU can be removed.
- MaxxECU Relocated under driver seat for a clean and simple installation.
- Specify injectors and ignition type
- Support OEM Drive by wire or aftermarket.
- Specify intake and throttle type. We do offer custom DBW Pedal kit for complete throttle cable removal.
- Cruise control working
- Boost control valve (valve not included)
- Wiring for Water Meth control
- OEM Fan Control
- A/C Control (but no with the AC Button yet).

CAN to MPX Module Not Included. We're working on a solution but it's not available yet!

Extra harness included:
- 8HP Transmission harness with wiring for sequential shifter

*** MADE TO ORDER *** 3-4 weeks production delay.
Core harness might be required depending on the setup.

Custom made wiring harness for Lexus SC300 compatible with MaxxECU Race or Sport.
- OEM ECU can be removed.
- MaxxECU is located at the OEM ECU location on the passenger feets
- Specify injectors and ignition type
- Support OEM Drive by wire or aftermarket.
- Specify intake and throttle type. We do offer custom DBW Pedal kit for complete throttle cable removal.
- Cruise control working
- Boost control valve (valve not included)
- Wiring for Water Meth control
- OEM Fan Control
- A/C Control

Extra harness included:
- 8HP Transmission harness with wiring for sequential shifter

*** MADE TO ORDER *** 3-4 weeks production delay.
Core harness might be required depending on the setup.

Custom made wiring harness for Toyota Supra compatible with MaxxECU Race or Sport.
- OEM ECU can be removed.
- MaxxECU is located at the OEM ECU location on the passenger feets
- Specify injectors and ignition type
- Support OEM Drive by wire or aftermarket.
- Specify intake and throttle type. We do offer custom DBW Pedal kit for complete throttle cable removal.
- Cruise control working
- Boost control valve (valve not included)
- Wiring for Water Meth control
- OEM Fan Control
- A/C Control

Extra harness included:
- 8HP Transmission harness with wiring for sequential shifter

*** MADE TO ORDER *** 3-4 weeks production delay.
Core harness might be required depending on the setup.

Custom made wiring harness for Toyota Supra MK3 with 1jz or 2jz swap compatible with MaxxECU Race or Sport.
- OEM ECU can be removed.
- MaxxECU is located at the OEM ECU location on the passenger feets
- Specify injectors and ignition type
- Support OEM Drive by wire or aftermarket.
- Specify intake and throttle type. We do offer custom DBW Pedal kit for complete throttle cable removal.
- Cruise control working
- Boost control valve (valve not included)
- Wiring for Water Meth control
- OEM Fan Control
- A/C Control

Extra harness included:
- 8HP Transmission harness with wiring for sequential shifter

*** MADE TO ORDER *** 3-4 weeks production delay.
Core harness might be required depending on the setup.

Custom made wiring harness for Honda S2000 compatible with MaxxECU Race or Sport.
- OEM ECU can be removed.

- Specify injectors and ignition type
- Support OEM Drive by wire or aftermarket.
- Specify intake and throttle type. We do offer custom DBW Pedal kit for complete throttle cable removal.
- Cruise control working
- Boost control valve (valve not included)
- Wiring for Water Meth control
- OEM Fan Control
- A/C Control

Extra harness included:
- 8HP Transmission harness with wiring for sequential shifter

*** MADE TO ORDER *** 3-4 weeks production delay.
Core harness might be required depending on the setup.

MaxxECU Mini 8HP45/70/90 Controller.

Please ensure that your transmission variant is compatible for flashing with the list available on maxxecu.com.

What's included:
- MaxxECU mini
- Perfect Tuning 8HP 6ft Harness
- If you need a specific length, please contact us when ordering.
- A basic tune to get your car up and running (minimal functions)

********* If a BMW or Dodge Shifter harness is required please add it to your cart if not, only a DTM-6 Connector is included and you need to make your own connections to your shifter *************

Advanced remote tuning available here:
https://perfecttuning.net/appointment/1?

Faisceau moteur complet fabriqué sur mesure pour MaxxECU GEN2 TRACK ou GEN2 RACE. Destiné aux swaps, aux voitures de course et aux projets où le câblage moteur d’origine est remplacé. Ce n’est pas un adaptateur Plug-in pour le connecteur d’ECU d’origine. Fabriqué selon le moteur, les injecteurs, l’allumage, le papillon, les capteurs et les fonctions du véhicule. Un faisceau donneur (core) peut être requis. Délai habituel : 3 à 4 semaines après réception des spécifications et des pièces requises.

1ft harness for bmw shifter that goes with the MaxxECU Mini 8HP Standalone Controller

1ft harness for Dodge shifter that goes with the MaxxECU Mini 8HP Standalone Controller

BOOST icon for MaxxECU CAN keypad.