We are proud to release a complete bolt-on transmission mount kit with crossmember for the JZA80 Supra, SC3/400, and Soarer.

What's included:
- Crossmember and spacers
- Transmission side bracket
- Polyeurethane Bushing
- All the necessary hardware

MaxxECU Race C1 Harness

MaxxECU 8HP (GEN1) cable harness (BMW 8HP shifter)

MaxxECU RACE harness 2 (EGT, E-Throttle, extra)

8HP transmission connector kit with pin and seals (16)
Works will all variation of 8HP transmsisions.

This safety deposit is fully refunded once we have received the tool.

We ONLY accept PayPal Friends and Family or Interac in Canada at support@perfecttuning.net.

REGULAR PAYMENT FEES ARE NOT REFUNDED TO US AND WILL BE DEDUCTED FROM THE SAFETY DEPOSIT.

Shipping return address is:
​ ​Perfect Tuning
​ ​4935 Blvd. Industriel, Sherbrooke
​ ​QC, Canada, J1R0P4

If this tool is crossing the border, DO NOT insure or declare higher than $10 USD. If not, broker fees will be deducted from your safety deposit.

If you're planning on controlling your transmission with a Maxxecu, you will have noticed you need to flash its valve body. This tool allows you to do just that!

How it works:
- Rental is $100USD
- Shipping is at buyer's expense both ways
- We expect the tool to be shipped back within 7 workings days following your reception

***A $600USD safety deposit is required to rent the tool, which will be fully refunded once the tool is back in our possession***

Important notice:
Maxxecu is actively developing this software, implying they will most likely release new features and options in the future, requiring a new reflash. In this case, we offer a 50% discount on the tool rental.

Our kit allows you to adapt nearly all 2015+ Dodge 8HP transmissions to any flavour of JZ engine you like.

What's included:
​- Adapter plate
- Torque adapter with centering hub adapter
- All the necessary hardware
- Instructions (code QR) (which you can find here)

What you'll need:
- An OEM flex plate (from an automatic JZ)
- OEM or ARP flex plate bolts (new ones are strongly recommended)

12 pack of Motul 1L Transmision Fluid ATF VI 100% Synthetic
Used for 8HP transmissions.
Around 9 liters are required to fill 8HP tranmission so you have few extra if you spill it or want to flush it after few miles to inspect the oil.

This service covers professional installation only – parts are not included. For the PCB and epoxy potting compound, please refer to our other listings.

Our experts handle the precise installation of the PCB board into your 8HP Mechatronik. We take care of soldering and testing to ensure optimal performance. Simply send us your Mechatronik, and we'll do the rest!

8HP Epoxy Potting Compound for Turbolamik PCB Installation.

This 5 buttons CAN Keypad is perfect for a 8HP transmission swap!

It feels extremely tactile and can light up a variety of colors.

Can be mounted horizontally or vertically, buttons are removable and are interchangeable and can be rotated 90°

Includes button inserts as shown (others available)

5 Button:
PRND and a customizable button that can be used for LC or mode change.

4 wire Deutsch connector:
12V+
Ground
CAN H
CAN L

https://media.blinkmarine.com/pkp-1500-li-canopen-um

CAN based keypads from Blink Marine in Italy using the J1939 CAN protocol.

Full support in all MaxxECU units.



No icon packs are included, must be bought separately Pre programmed with J1939 CAN standard which MaxxECU uses.

CAN based keypads from Blink Marine in Italy using the J1939 CAN protocol.

Full support in all MaxxECU units.



No icon packs are included, must be bought separately Pre programmed with J1939 CAN standard which MaxxECU uses.

CAN based keypads from Blink Marine in Italy using the J1939 CAN protocol.
Full support in all MaxxECU units.

No icon packs are included, must be bought separately Pre programmed with J1939 CAN standard which MaxxECU uses.

Made to fit the Dodge 8HP shifter, if using another CAN shifter, the connector needs to be cut and changed.
The OBD connector is there for future flash/tuning purposes.
1800mm between the shifter and the GT150 connector.
2100mm between the 8HP connector and the GT150 connector.

CAN based keypads from Blink Marine in Italy using the J1939 CAN protocol.

Full support in all MaxxECU units.



No icon packs are included, must be bought separately Pre programmed with J1939 CAN standard which MaxxECU uses.

CAN based keypads from Blink Marine in Italy using the J1939 CAN protocol.

Full support in all MaxxECU units.



No icon packs are included, must be bought separately Pre programmed with J1939 CAN standard which MaxxECU uses.

Toyota Supra MKIV Clutch Simulator Kit
Include clutch position sensor with bracket and connector and clutch simulator with clutch master delete plate.